12V LED Turn Signal Light Motorcycle Stop Signals DRL Flowing Water Flasher 2 in 1 Blinker Tail Lamp Universal M10 Brake Light
1.Name: Oval two-colour water lamp
2.Mode: Day running light mode + Flowing water turn mode
3.Waterproof: IPX62 level waterproof
6.Screw size: 10MM
7.Wiring length: About 20CM
9.Wiring mode: The green wire is connected to the positive pole of the daytime running light, The red wire is connected to the positive pole of the turn signal, and The black wire is connected to the negative pole
10.Features: Built-in IC control chip
1. Three classic colour schemes to create distinctive motorcycles, making you a bright spot.
2. Day running and turns to double warning, the light is cool and the appearance is individual.
3. Unique appearance design, transparent acrylic lampshade, good light transmission, smooth and bright surface.
4. The rubber lamp holder is flexible and can be bent appropriately to effectively prevent collision and reduce the chance of damage.
5. The normal working voltage is 12V, and the screw interface is 10MM, suitable for most motorcycles.
6.Built-in LED Flash Relay:
* Our Turn Signal Light Built-in LED Flash Relay.
* If You Can NOT Get the Flowing Water Effect, That Means Your Motorcycle Already Installed Halogen Flasher Relay.
* You Need to Remove the Original Halogen Flasher.
01 Three classic colours
02 Three modes
– Day running light mode/Flowing water turn mode/Day running light+Flowing water turn mode
03 Unique appearance design
04 Transparent acrylic lampshade
– The light transmission is good, the LED light is fully displayed, and the surface of the lampshade is smooth and bright.
05 Rubber lamp holder
– The rubber lamp holder is flexible and can be bent appropriately, effectively preventing collisions and reducing the chance of damage.
06 Widely used in electric vehicles and motorcycles
– Suitable for motorcycles and electric vehicles with screw interface 10MM and DC-12V (electric vehicles need to be transferred).
Motorcycle headlight installation effect display：
Motorcycle rear light installation effect display：
Electric vehicle rear light installation effect display：
07 Product size and detail display
– The green wire is connected to the positive pole of the daytime running light, The red wire is connected to the positive pole of the turn signal, and The black wire is connected to the negative pole.
# Tips #
1. Before installing the turn signal, please connect the turn signal separately to the 12V DC power supply to test whether the turn signal can work normally.
2. Installation instructions of the flowing water turn signal:
If only half or a few LED lights light up or flashes quickly:
(1) Please remove the flash relay on the motorcycle
(2) The flash relay can be replaced with an LED flash relay which can adjust flashing speed, slow down the frequency.
3.If you have any other questions, please contact our customer service staff in time.
09 Packing list
– 2PCS turn signal light
– 4PCS turn signal light