DLE Original NEW DLE30 30CC DLE Gasoline/Petrol Engine for RC Airplane Two Strokes Single Cylinder Side Exhaust Natural Cooling

Packing list:

DLE engine * 1

DLE electronic igniter set (CDI) * 1

Carburetor * 1

Engine aluminum column nail set * 1

Exhaust pipe group * 1

NOTE:

1. Please carefully check the propeller, engine frame, and other relevant parts before use to ensure that the screws and nuts are not loose. Screw thread glue (E.g: LOCTITTE 242) is used to fix the screws and nuts during installation.

2. If the engine is to be run in or tested on the test bench, a damping device must be installed, otherwise some parts of the engine may be damaged. It is best to install the engine on the aircraft for running in. When the engine is running, no one is allowed to be in front of the propeller rotation plane to avoid injury.

Parameter:

Displacement: 30.5 cm³
Bore: 1.42 in (36 mm)
Stroke: 1.18 in (30 mm)
Weight: 2.4 lb (1.10 kg)
RPM Range: 1,600-8,500
Output: 3.7 hp @ 8,500 rpm
Requires: Gasoline, oil, ignition battery & propeller
Includes: electronic ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & mounting template
Suggested Propellers: 18×8, 18×10, 19×8 & 20×8
Suggested Break-in Prop: 18×8

Technical Data:

Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo or LiFe use requires voltage regulator.)
Compression Ratio: 7.6:1
Gasoline/Oil Mix: 30:1
Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.1 oz (60 g); Ignition: 4.2 oz (120g)

Logistics size：26cm ×24 cm × 15cm Logistics weight:1.7 KG/piece