The Smart Watering Kit allows providing all your own smart plant monitoring systems with ease of use and unlimited options! The kit includes pump, soil moisture sensors, a water switch to redirect the water to up to 4 plants, and pipes for the water to go through. When you power the board after uploading the program we attached to the wiki, the board uses the 4 soil moisture sensors to determine the soil level in the plant. The board will send a command to the switch to open a specific channel for a specific plant that needs water currently (up to 4 plants at once).
Afterward, the board will send a command to turn on the pump and suck water into the switch, the switch will separate the stream and will give just enough water for your plants. Then it will close the pump and the switch and continue to check when does your plant needs water. Itrsquos possible to make it even smarter with a light sensor so, for example, the plant will not be watered at night or with a rain sensor so if it’s raining, don’t water the plant as well. The smart watering kit is based on the Crowduino Smart pump shield which is included as well with the kit.
The Smart Pump Shield is a brand new one-of-a-kind shield that allows you to build projects with ease and eliminates the need for jumpers, breadboards, mess, and complexity. The smart pump shield, originally developed for smart watering kits allows connecting multiple sensors including a humidity sensor, light sensor, rain sensor, and soil moisture sensor. it provides 5 relays that can be controlled separately by pins or by integrating the interfaces. 4 relays can control 4 channels of water switch directly and the 5th relay can control a pump, all by crowding interfaces for ease of use and less complexity. The board also provides 12v input that is split between the board and the modules, providing the modules 5v input, which eliminates the need for other separated power adapters.
The shield can be used for various projects including but not limited to smart watering systems, smart homes, vending and drinking machines, cocktail mixer, and so on.
Eliminates the need for messy jumpers and breadboards, connect all sensors and modules with ease!
Control the relays both with Crowduino interfaces and with normal ones, the board is not limited to crowding only.
Power the board with a single 12V power supply, no need for a separate power supply for Arduino.
6 interfaces for sensors, one interface for the water switch, and one interface for the motor or pump.
on-board power switch to control the power.
Size of the box: 25cm x 19cm x 5.7cm
Length of water pipe: 5m.
Length of 3 pin crow tail cable: 50cm.
We also have those in stock or, if you need please check the:
1- Elecrow DC12V Four-Way Valve Independent Control Solenoid Valve for Automatic Smart Watering Kit
2- Elecrow DC Diaphragm Pumps for Automatic Smart Watering Kit 6 12V R385
- Crowtail- Smart Pump Shield v2.0 x 1
- Crowtail- Capacitive Soil Moisture Sensor x 4
- 5m 4x6mm Water Pipe x 1
- DC 12V Adapter x 1
- DC 12V Four-Way Valve x 1
- Water Pump x 1
- 1m 4 Pin Crowtail Cable x 4
- Five-Way Pipe x 1
- USB Cable x 1