Servo Features:
• Translucent body
• Lightweight
• Less noise
This is the most popular mini servo. Only weighs 9 gram and gives you a 1.5 kg/cm torque. Pretty strong regarding its mini size. Suitable for beam type robots.SG90A 9G servo Specifications:
No-load speed: 0.12 sec / 60 deg (4.8 V)
Locked-rotor torque: 1.5-1.7kg/cm (4.8V-6V)
Operating temperature: -30~~+60 degrees Celsius
Dead zone setting: 5 microseconds
Working voltage: 4.8V-6V
Size: 21.5mmX11.8mmX22.7mm
Weight: 9 gramsA2212 1400kv Motor Specifications:
VK: 1400
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/the 60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: Φ27.5 x 30mm
Shaft Diameter: Φ3.17mm
Weight: 47g

30A Brushless Speed controller ESC MultiCopter Quad-rotor X-copter
Specifications:
Compatible with: 400-450 helicopters / Aircraft or Quad-Rotor Multi RC Helicopter
-Output: Continuous 30A, Burst 40A up to 10 Secs.
-Input Voltage: 2-3cells lithium battery or 5-9 cells NiCd/NiMH battery.
-BEC: 2A / 5V (Linear mode).
-Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: Brushless Motor)
With T plug and 3.5mm banana connectors
Note: This ESC is not able to flash the firmware.

Package included:
2 x 9G SG90 servo
1 x A2212 KV1400
2 x 8060 propeller
1 x 30A ESC

Package information:
Package Size:25*15*3cm
Package Weight:130g
Polybag package

Note:
Due to the hand measurement, there has a size error of about 1-2mm.
Item colour displayed in photos may be showing slightly different since monitors are not calibrated the same.